Industrial Coatings, Patches, Repairs and Surface Preparation for KY,TN,IN and WV

Industrial Coatings, Patches, Repairs and Surface Preparation for Commercial Painting in Kentucky, Tennessee, Ohio & Indiana

SURFACE PREPARATION – STEPS & METHODS  for CLEANING AND DEGREASING:

All residue – traces of oil and grease and other contaminants must be removed before grinding or shot blasting.  Grinding and shot blasting without cleaning will only push contamination deeper into the porous concrete surface. Use oil and grease emulsifiers to clean thoroughly.  Stubborn or heavy residue areas may require repeated applications.  Only then will the surface be ready for Industrial Coatings or a Commercial Painting in Indiana & Kentucky

MECHANICAL PREPARATION:

Methods such as Shot and Sand Blasting, Scarifying, Diamond Grinding, Grinding/Sanding, Key Cuts and Water Jetting and Blasting are examples of effective means of mechanical surface preparation.

Below is a brief summary of these methods with features, benefits and limitations:

Shot Blasting,  The preferred method of mechanical preparation that strips thin coatings, cleans and profiles simultaneously.  It is suitable for large and small areas, delivers high production rates, dust free, dry and cost-effective.  The excess shot must be swept-up after blasting.

Scarifying Method uses metal or carbide disks that rotate at high speeds.  Levels uneven floors and edges of concrete. Removes adhesives and thick film coatings. Dusty, very slow and labor intensive. Leaves very rough profile only fit for high build coatings.

Diamond Grinding – Diamond bits are used to grind the surface.  Leaves a very smooth profile, ideal for thin film system applications. Low dust levels. Removes epoxies and urethanes. Slower than other methods.

Grinding/Sanding Prepares, cleans and abrades existing coatings for recoat and helps smooth aggregate floors. Is slow and labor intensive.

Key Cuts Masonry saw cuts/small grooves (approx.1/4inch deep) made around drains, doors and transitions.  These serve as anchor points for the epoxy system, limit sections of failure and reduce undercutting by chemicals.

Water Jetting or Blasting – Water sprayed at extremely high pressure (5,000-40,000 psi) with enough force to profile concrete, remove laitance, contamination and unsound concrete.  No dust is generated, tight spaces can be prepared and different profiles can be achieved.  Eliminates need for harsh chemicals.  Sufficient water source must be available, time required for thorough drying.

PATCHING AND REPAIR

Settling cracks – repair after the sealer is applied and before finish coating.  Expansion joints should be repaired and filled with epoxy after the coating system is in place.  When patching apply sealer to crevice to be repaired before applying epoxy patch.   This will enhance the bond strength of the patch.   Apply epoxy / aggregate mixture immediately after mixing – spread with trowel – grind off excess.  This process should be considered before any renovation or remodeling project is initiated or completed.

  • Water tower coatings and paints
  • Wastewater treatment coatings

  • Epoxy Floor Coatings

  • Rustoleum Polyurea
  • Metalic Floor Coatings
  • Polyaspartic Floor Coating
  • Zero VOC
  • Zero HAP
  • NeverWet
  • XIM – X-I-M
  • Krud Kutter
  • Anti-Slip Floor Coatings
  • Rust Prevention and Rust Removal

Industrial Coatings, Patches, Repairs and Surface Preparation for Commercial Painting in Kentucky, Tennessee, Ohio & Indiana

Words and Definitions of the Industrial Coatings and Painting Industry for Kentucky KY, Indiana IN, West Virginia WV, Ohio OH, TennesseeTN and Illinois IL

Terms & Definitions – Industrial Coatings and Painting Industry Terminology for Kentucky KY, Indiana IN, West Virginia WV, Ohio OH, TennesseeTN and Illinois IL

Acid containment
Anti-microbial coatings
Cement crack repair
Chemical containment
Coatings for cooling towers
Coatings for wet areas
Cold weather coatings
Concrete patch
Epoxy flooring
Fiber reinforced linings
High heat coating
Noxyde
Protective coatings
Quick Dry Concrete Patch
Rust corrosion protection
Rust-Oleum
Rust-Oleum 9100
Rust-Oleum 9800
Rust-Oleum W9200
Tank linings
Thermal shock resistant floor coating
Vinyl ester
Wastewater treatment coatings
Waterproofing
Zinc rich coating

HPP Industrial Sales and Supplies: Coatings, Containment, Protection

HPP Industrial Sales Provides a uniques combination of products and services to our ever growing client base of customers.  Please contact Mark Sholtes directly at (502) 552-3569.

Acid containment , Anti-microbial coatings,  Cement crack repair , Chemical containment , Coatings for cooling towers , Coatings for wet areas , Cold weather coatings,  Concrete patch,  Epoxy flooring , Fiber reinforced linings , High heat coating,  Noxyde,  Protective coatings,  Quick Dry Concrete Patch , Rust corrosion protection,  Rust-Oleum,  Rust-Oleum 9100,  Rust-Oleum 9800,  Rust-Oleum W9200,  Tank linings,  Thermal shock resistant floor coating,  Vinyl ester,  Wastewater treatment coatings,  Waterproofing,       Zinc rich coating

 

Advanced 

Polymer Coatings

HPP offers a full range of polymer-based coating systems geared to meet demanding industrial requirements for corrosion, high temperature and abrasion resistance. These polymer coatings are highly effective against extreme corrosion and erosion, with a temperature resistance capability up to 500°F (260°C).The HPP family of coatings provides long-term, cost-effective protection of equipment used in chemical, petro-chemical, storage/ secondary containment, flooring, power generation, marine, railroad and over-the-road transportation industries.
Because of our superior custom formulation capabilities, we can design products specifically tailored to meet each customer’s requirements. This technological advantage allows us to continually find new innovations and opportunities to expand both our product line and assist our customer base with their ever changing needs.
The HPP INDUSTRIAL COATINGS TEAM  have helped protect commercial, industrial, and residential buildings around the world.  Using is a special grade of PVDF resin used by licensed industrial paint manufacturers as the base resin in long-life coatings for aluminum, galvanized steel, and aluminized steel.    Applications include metal roofing and siding, window and door frames, curtain wall and other miscellaneous metal trim and components. 

HPP Specialty Products and Services Include:

Acid containment

Anti-microbial coatings

Cement crack repair

Chemical containment

Coatings for cooling towers

Coatings for wet areas

Cold weather coatings

Concrete patch

Epoxy flooring

Fiber reinforced linings

High heat coating

Noxyde

Protective coatings

Quick Dry Concrete Patch

Rust corrosion protection

Rust-Oleum

Rust-Oleum 9100

Rust-Oleum 9800

Rust-Oleum W9200

Tank linings

Thermal shock resistant floor coating

Vinyl ester

Wastewater treatment coatings

Waterproofing

Zinc rich coating

HPP Industrial Sales and Supplies:  Coatings, Containment, Protection

Kentucky, Indiana, Tennessee, West Virginia, Ohio & Illinois